Run end-to-end testing with Jest and Puppeteer

AdeTomi — Wed, 03 Mar 2021 20:24:05 +0000

What is Jest?

In Jest, there is truth - William Shakespeare

Jest is a Javascript testing framework that helps to ensure that our code-base is correct. It is a great testing library that requires little configuration.

What is Puppeteer?
Puppeteer is a Node library that provides a high-level API to control headless Chrome, Firefox, and Chromium over the DevTools protocol.

Puppeteer is for integration testing. It creates a programmable browser (in this case, but not always, a headless browser) to check your site. It also simulates an actual user experience on your application.

Where unit testing is concerned with validating the smallest chunks of source code in isolation, integration testing finds errors in how these chunks interact with each other.

What is End-to-End testing?

This is a software testing technique used to test the flow of an application from beginning to end. It helps to validate if an application is behaving as it should.

The goal of end-to-end testing is to reproduce real user experience in order to validate data integrity and system integration.

Why should we use Jest and Puppeteer together?

Knowing that Puppeteer is basically a programmable browser and Jest is a testing framework, therefore, in order to be able to test the User Interface, you would need to use Jest and puppeteer together. You can check out the state of JS 2020 testing frameworks.

Setup and Configuration

Node setup

You'll need to have node and npm installed on your machine. To verify you have both tools properly installed locally, run the following commands.

node -v

npm -v

And if it doesn't work, head over to the Node documentation to download and install.

Jest and Puppeteer setup

You'll start by installing Jest and Puppeteer in your project directory. Open the project in your cli and run the following commands.

If you're using yarn, run:

yarn add --dev jest puppeteer jest-puppeteer

If you're using npm, run:

npm install --save-dev jest puppeteer jest-puppeteer

Once they are installed, they are added to the list of dependencies in your project. You should have them in the devDependencies section in your package.json file as shown below.

./project-directory/package.json

"devDependencies": { 
  ...     
  "jest": "^26.6.3",   
  "puppeteer": "7.0.1" 
}

Now that you have Jest and Puppeteer installed, it's time you configure your test environment and global setup.

You'll start by creating a jest.config.js file in the root directory of your project and write or copy the following code into it.

./project-directory/jest.config.js

"devDependencies": { 
  ...     
  "jest": "^26.6.3",   
  "puppeteer": "7.0.1" 
}

module.exports = {
  preset: "jest-puppeteer",
  globals: {
    URL: "http://localhost:3000"
  },
  verbose: true};

jest-puppeteer preset is used as a base for Jest's configuration. This allows you to use Jest with Puppeteer.
globals is where the variables that will be available in your whole test suites resides.
URL points to where our application is running.
verbose: true this helps provide more information on logs regarding each test you run.

In your ./project-directory/package.json file add the following code

"scripts": {
    "test": "jest"
  },

"test": "jest" allows Jest to run your tests.

You'll also need to create a jest-puppeteer.config.js in the root directory of your project and write or copy the following code into it.

./project-directory/jest-puppeteer.config.js

module.exports = {
        launch: {
        headless: false, 
            slowMo: 30,

        }
    }

launch this object enables you to give specific options for chrome or chromium instance. It is usually launched before your test runs.
Note that, you can either specify your options in puppeteer.launch() or you can jest-puppeteer.config.js file as we did here.
headless: false enables you to see your browser while your tests run. Originally, it is set to true so your browser runs in the background, which means that you don't get to see your browser running the tests.
slowMo: 30 This slows the test actions by 35 milliseconds so you'll be able to see every action made by puppeteer on your browser.

One thing to note is by default, the timeout is 30 seconds in puppeteer which is not usually enough time for your code to run. That's why you use slowMo (to cause a delay).

Yay, you're finally done with the setup process. It's time to do some end-to-end testing.

End-to-end testing

Testing the title of your homepage

Create an app.test.js file in the src folder of your project. This is where you'll be writing the test for the title of your homepage. Jest is configured to run tests on files that end with .test.js or .spec.js, hence the reason behind the naming convention. Once you've created the app.test.js file, copy the following code into it.

./project-directory/src/app.test.js

const timeout = 15000;

beforeAll(async () => {
    await page.goto(URL, {waitUntil: 'domcontentloaded'});
});

describe('Test page title and header', () => {
    test('page title', async () => {
        const title = await page.title();
        expect(title).toBe('Testing');

    }, timeout);
});

Then run:

npm run test

It takes a while to run the tests. When it's done, you should get something like this:

PASS  src/app.test.js
    Test page title and header
      √ page title (20ms)

    Test Suites: 1 passed, 1 total
    Tests:       1 passed, 1 total
    Snapshots:   0 total
    Time:        0.746s, estimated 1s
    Ran all test suites.

Looking at the first line of your code, you assigned a value to a variable(timeout) which specifies the time duration for your tests. This ensures that your tests run before timing out.

Note that if your tests take a long time to run and a timeout value is not specified, your tests might fail.

beforeAll allows Puppeteer to navigate to the specified URL which was declared earlier as a global variable and tells it to waitUntil your content has loaded before it runs the test. It is part of the tests setup

describe allows you to group tests into units.

Lastly, there's your test function where the page title is fetched and you used the expect which is Jest built-in assertion library to check if the content of the title is 'Testing'.

When using the assert operation e.g expect there are so many other matcher functions that can be used alongside such as .toMatch(regexp | string) , .toBeDefined() , .toContain(item) , etc. You'll find more of these matchers in the documentation.

Testing the h1 tag of your homepage

In the describe block you wrote earlier, add the following code to it:

./project-directory/src/app.test.js

test('Header', async () => {
        const headerOne = await page.$('.header');
        const header = await page.evaluate(headerOne => headerOne.innerHTML, headerOne);

        expect(header).toBe("Run End-to-End testing with Jest and Puppeteer");
    }, timeout);

Your file should look like this:

const timeout = 15000;

beforeAll(async () => {
    await page.goto(URL, {waitUntil: 'domcontentloaded'});
});

describe('Test page title and header', () => {
    test('page title', async () => {
        const title = await page.title();
        expect(title).toBe('Testing');

    }, timeout);

    test('Header', async () => {
        const headerOne = await page.$('.header');
        const header = await page.evaluate(headerOne => headerOne.innerHTML, headerOne);

        expect(header).toBe("Run End-to-End testing with Jest and Puppeteer");
    }, timeout);

});

Then run:

npm run test

You should this once the tests are completed.

PASS  src/app.test.js
    Test page title and header
      √ page title (28ms)
      √ Header  (80ms)

    Test Suites: 1 passed, 1 total
    Tests:       2 passed, 2 total
    Snapshots:   0 total
    Time:        1.652s, estimated 4s
    Ran all test suites.

page.$() is used to select the HTML element using it CSS selector. This returns an ElementHandle(represents an in-page DOM element) which is then used by page.evaluate() to get access to the innerHTML of that Element.

Debugging tests

It's one thing for your tests to pass. What if you have one or more failing tests how do you resolve that in Puppeteer? There are several ways to debug your tests but then you'll be focusing on jestPuppeteer.debug()

jestPuppeteer.debug() as in the documentation (on GitHub) suspends test execution and allows you to see what's going on in the browser. It uses the jestPuppeteer.debug() method which enables you to pause the tests to inspect the browser.

Conclusion

In this guide, you explored Jest and Puppeteer and have seen that to use use them together.

You've learnt how to set up Jest and Puppeteer environment, write tests and debug your tests. To learn more head over to the official documentation of Jest and Puppeteer.

Happy learning 😄 !

Forem: AdeTomi